DMC Miniature Adjustable Aviation Crimp tools

1.Standard: M22520/2-01 2.Wire range: 20AWG(0.52mm2)to32AWG(0.0316mm2) 3.OEM 4.Series: DMC 5.Material:

DETAILS

       The aviation crimping tool (“crimping tool” for short) is used for the crimping of wires and contactors in electric connectors meeting the USA Military Standard (M22520/2-01). The crimping range of the crimping tool is standard wire 20AWG (0.52MM2) to 32AWG (0.0316mm2); and the contactors are made of copper alloy materials locally annealed.

Adjusting disk gear press head working diameter mm/INCH A GO B NO GO 1 0.33/0.013 0.46/0.018 2 0.41/0.016 0.54/0.021 3 0.48/0.019 0.61/0.024 4 0.56/0.022 0.69/0.027 5 0.66/0.026 0.79/0.031 6 0.76/0.030 0.89/0.035 7 0.86/0.034 0.99/0.039 8 0.99/0.039 1.12/0.044

Real Object of Caliper body

 

Structure and Principle

        The crimping tool adopts a curve driving mechanism, the acting force is transferred to four press heads by four curves in the head cavity of the right tool handle to make the press heads do the centripetal rectilinear motion, press teeth at the front ends of the press heads are pressed on the contactor, and the crimping of the wire and the contactor is finished. After crimping, the force applied to the tool handles is removed, and under the action of the spring, the four press heads automatically reset. The four press heads are consistent in pressing and resetting, the depths of the indentations are the same, so that the crimping quality of the wire and the contactor is reliably guaranteed.

Notes

1. Should not put sharp and hard copper crimping pieces or solid or thick-wall cylinder-shaped pieces in the pressing teeth cavity, otherwise the rack and other related parts will be damaged;2. The corresponding surfaces, contacting the upper working surface of the cam and the surface of the cam, of the adjustable tool handles should be extremely carefully cleaned, otherwise, the depth of the indentation is affected, and the crimping quality is lowered;3. When the crimping tool is used, please pay attention to the action of the rack ratchet, stop the crimping tool if any abnormity is found and contact us;4. When the big-diameter contact enters the small gear or the hard object is jammed in the pressing teeth cavity, if the tool teeth continue to be closed, the tool teeth or other parts will be damaged, please contact us;5. After the tool is used, please clean the tool and put it in a box or bag to protect the tool from dust and impurities.Real Object of Crimping Tool, Various FixturesFACTORY:

DMC Miniature Adjustable Aviation Crimp tools